Floor Coating Failure Diagnostic Center
Identify why your coating is peeling, bubbling, cratering, or refusing to cure. Follow strict laboratory remediation protocols to fix your slab right the second time.
🔍 Advanced Multi-Factor Failure Diagnostic Wizard
Select your specific floor symptoms and ambient variables to determine the exact failure root cause.
Common Concrete Coating Failure Modes
Hydrostatic Pressure Peeling
Vapor pressure pushing through porous concrete creates high hydrostatic tension under non-breathable epoxy films, causing complete sheet detachment.
Thermal Outgassing Pinholes
Applying resin as ambient temperatures rise forces expanding air inside concrete pores upward through wet epoxy, leaving permanent craters.
Contamination Fisheying
Traces of silicone spray, tire shine, or motor oil create high surface tension zones where wet liquid resin pulls away from bare concrete spots.
Need a Lab Analysis for Your Failed Floor?
If your coating failure doesn’t match standard patterns, send us clear photos of the damage and your preparation steps for an engineer review.
Submit Failure Photos for Review